Leff
21.10.2014, 15:36
X-NUCLEO-NFC01A1 - EXPANSION BRD, M24SR64-Y DYNAMIC
http://ru.farnell.com/stmicroelectronics/x-nucleo-nfc01a1/expansion-brd-m24sr64-dynamic-nfc/dp/2445853?CMP=e-email-211014-ST
• M24SR64-Y Dynamic NFC/RFID tag IC
• NFC antenna: 31 mm x 30 mm 13.56 MHz
double layer inductive antenna etched on the
PCB (ANT14)
• Compatible with STM32 Nucleo boards
• Equipped with Arduino UNO R3 connect
• Powered through the Arduino UNO R3
connectors
• 3 color LEDs for general purpose
The X-NUCLEO-NFC01A1 is a Dynamic NFC tag
evaluation board to allow expansion of the STM32
Nucleo boards. It is compatible with the Arduino
UNO R3 connector layout and it is designed
around the M24SR64-Y. The M24SR64-Y device
is a dynamic NFC/RFID tag IC with a dual
interface. It embeds a 64 Kbit EEPROM memory.
It can be operated from an I2C interface or by a
13.56 MHz RFID reader or a NFC phone.
The board is powered through the Arduino UNO
R3 connectors. It also includes three LEDs for
general purpose.
http://ru.farnell.com/stmicroelectronics/x-nucleo-nfc01a1/expansion-brd-m24sr64-dynamic-nfc/dp/2445853?CMP=e-email-211014-ST
• M24SR64-Y Dynamic NFC/RFID tag IC
• NFC antenna: 31 mm x 30 mm 13.56 MHz
double layer inductive antenna etched on the
PCB (ANT14)
• Compatible with STM32 Nucleo boards
• Equipped with Arduino UNO R3 connect
• Powered through the Arduino UNO R3
connectors
• 3 color LEDs for general purpose
The X-NUCLEO-NFC01A1 is a Dynamic NFC tag
evaluation board to allow expansion of the STM32
Nucleo boards. It is compatible with the Arduino
UNO R3 connector layout and it is designed
around the M24SR64-Y. The M24SR64-Y device
is a dynamic NFC/RFID tag IC with a dual
interface. It embeds a 64 Kbit EEPROM memory.
It can be operated from an I2C interface or by a
13.56 MHz RFID reader or a NFC phone.
The board is powered through the Arduino UNO
R3 connectors. It also includes three LEDs for
general purpose.